hello Marcini,here is the config and detailed output:interface GigabitEthernet0 nameif OUT security-level 0 ip address 10.10.10.10 255.255.255.0 ipv6 enable ipv6 nd suppress-ra!interface GigabitEthernet1 nameif inside security-level 100 no ip address...
hello macin,i am trying to run the similar setup asa ---cloud---thirdparty, ipsec tunnel is up, seems like when i initiate the ping from behind ASA, its dropping and packet trace shows the "drop by comfigured rule". i dont have inside to outside any...
Able to manage it working adding the following command in the adagent CLIC:\IBF\CLI>adacfg options set -userLogonTTL 3600as adagent was taking a minute of userloginttlthanks all
I am runing ASA 8.4(2), adagent 1.0.0.32 windows 2003 server standard. adagent works fine, shows its status up and pulls the username to ip address binding for 1-2 minutes. after that it loses the binding. I have checkd the WMI on the server which i...
Agreed with DavidProduct should be only evaluated on the following factors:Tech Support and its availabilityUsers Experience/online docs, forumsAny vendor claiming specific features should have users to claim that proved under the specific condition ...