About Matt9583

Matt9583 · 06-27-2019

Hi Guys, I'm struggling with an issue connecting a Watchguard to a Cisco via IPSEC. I've managed to establish the VPN - however i get no traffic through it. I know I'm missing a route, like "ip route 10.33.0.0 255.255.255.0 10.0.0.253 but I get Inval...

Matt9583 · 06-29-2019

Champion!! That worked. Very complex one indeed!! Thanks so much for the help! Pinging 10.33.0.254 with 32 bytes of data:Reply from 10.33.0.254: bytes=32 time=4ms TTL=63Reply from 10.33.0.254: bytes=32 time=4ms TTL=63Reply from 10.33.0.254: bytes=32 ...

Matt9583 · 06-29-2019

also - the GW is 254 and the cisco is 253. so that look right with a tracert from 0.27C:\Users\adminVRAY>tracert 10.33.0.254Tracing route to 10.33.0.254 over a maximum of 30 hops1 3 ms 2 ms 4 ms 10.0.0.2542 <1 ms <1 ms <1 ms 10.0.0.2533 2 ms 2 ms 2 m...

Matt9583 · 06-29-2019

Hi Guys, I've made those changes. but still no luck. Here is the crypto ipsec sa per-msol-rtr-01#show crypto ipsec sainterface: GigabitEthernet0/0Crypto map tag: towatchguard, local addr 103.212.217.34protected vrf: (none)local ident (addr/mask/prot/...

Matt9583 · 06-27-2019

Thanks. I've posted the whole conf. I'm confused now what command to run :( if you could advise what to write. thanks.

Matt9583 · 06-27-2019

Building configuration... Current configuration : 16730 bytes!! Last configuration change at 14:19:44 WST Fri Jun 28 2019 by oiadmin! NVRAM config last updated at 10:37:22 WST Fri Jun 28 2019 by oiadmin! NVRAM config last updated at 10:37:22 WST Fri ...

Member Since	‎06-27-2019 02:08 AM
Date Last Visited	‎07-06-2019 08:12 AM
Posts	14

User Statistics

User Activity

Watchguard to Cisco ISR VPN - Established but no traffic

Re: Watchguard to Cisco ISR VPN - Established but no traffic

Re: Watchguard to Cisco ISR VPN - Established but no traffic

Re: Watchguard to Cisco ISR VPN - Established but no traffic

Re: Watchguard to Cisco ISR VPN - Established but no traffic

Re: Watchguard to Cisco ISR VPN - Established but no traffic