vWLC output of show sysinfo: (Cisco Controller) >show sysinfo Manufacturer's Name.............................. Cisco Systems Inc. Product Name..................................... Cisco Controller Product Version.................................. 8.1.120.0 RTOS Version..................................... 8.1.120.0 Bootloader Version............................... 8.1.120.0 Emergency Image Version.......................... 8.1.120.0 Build Type....................................... DATA + WPS System Name...................................... CISCO-CAPWAP-CONTROLLER System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1631 IP Address....................................... 10.0.0.2 IPv6 Address..................................... :: System Up Time................................... 2 days 14 hrs 2 mins 29 secs System Timezone Location......................... System Stats Realtime Interval................... 5 System Stats Normal Interval..................... 180 Configured Country............................... CA - Canada --More-- or (q)uit State of 802.11b Network......................... Enabled State of 802.11a Network......................... Enabled Number of WLANs.................................. 1 Number of Active Clients......................... 0 Burned-in MAC Address............................ 00:0C:29:E6:AC:ED Maximum number of APs supported.................. 200 System Nas-Id.................................... h WLC MIC Certificate Types........................ SHA1   AP output of sh version : Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 15.3(3)JA7, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2016 by Cisco Systems, Inc. Compiled Thu 31-Mar-16 22:35 by prod_rel_team ROM: Bootstrap program is C3500 boot loader BOOTLDR: C3500 Boot Loader (AP3G1-BOOT-M), Version 15.3 [vtoky-imagetype 106] AP7081.05b0.f082 uptime is 5 minutes System returned to ROM by reload System image file is "flash:/ap3g1-k9w8-mx.153-3.JA7/ap3g1-k9w8-xx.153-3.JA7" Last reload reason: This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email to export@cisco.com. cisco AIR-CAP3502I-A-K9 (PowerPC460exr) processor (revision A0) with 98294K/32768K bytes of memory. Processor board ID FTX1534KDF0 PowerPC460exr CPU at 666Mhz, revision number 0x18A8 Last reset from reload LWAPP image version 8.0.132.0 1 Gigabit Ethernet interface 2 802.11 Radios 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 70:81:05:B0:F0:82 Part Number : 73-12175-05 PCA Assembly Number : 800-32268-05 PCA Revision Number : A0 PCB Serial Number : FOC15302H94 Top Assembly Part Number : 800-32891-01 Top Assembly Serial Number : FTX1534KDF0 Top Revision Number : A0 Product/Model Number : AIR-CAP3502I-A-K9 Configuration register is 0xF ... View more

After creating a DHCP server via win server 2019, and adding rule 43, I now get these messages: Translating "CISCO-CAPWAP-CONTROLLER.axtmann.ca"...domain server (1.1.1.1) *Mar 1 01:51:40.935: %CAPWAP-5-DHCP_OPTION_43: Controller address 192.168.5.113 obtained through DHCP Not in Bound state. *Mar 1 01:52:27.450: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP. *Mar 1 01:52:30.470: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.5.10, mask 255.255.255.0, hostname AP7081.05b0.f082 Translating "CISCO-CAPWAP-CONTROLLER.axtmann.ca"...domain server (1.1 As far as I can tell, it seems that the AP can find the controller, but It does not seem to want to connect for some reason? Any Idea why? ... View more

Where is that configured? On the AP or on DHCP server? ... View more