Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey guys, sorry for the urgent tag, but it kind of is.I have an Aastra LLDP enabled phone connected to a C3560 POE Switch running 12.2(55)SE1.Here's my interface config where the phone connects.interface FastEthernet0/1switchport access vlan 20 (DATA...
I have the responsibility of possibly setting up load balancing for a couple of our branch offices.Basically it would be some sort of router that could route between the private network and two external WAN connections and load balancing across each ...
Hey guys I have a server connected to an interface on a C3560 and I'm trying to mark the traffic coming to it but I'm not getting any hits on the counters when I do a show policy-map interface command.Here's the config:Access-list 101 permit ip host ...
Hey guys, I'm trying out some QoS labs on a 2610XM router with IOS 2.4[25d].When I input the show mls qos interface Serial0/2 command to view statistics I get this error:Router1#show mls qos interface Serial0/2Invalid interface.Serial0/2 is a T1 inte...
Hey guys, I'm using GNS3 to try out some labtas I've been thinking of. I've got this one where I'm setting up RIP and I'm stuck. I've attached a picture of the topology so you can see for yourself.Here's my problem.When I enable RIP on all the router...
Hey Yong, thanks for the reply.I think I briefly read what you're talking about, yesterday. Do I need DHCP options in the DATA VLAN's DHCP configuration to tell the phone the VOICE VLAN it should be on? Isn't that the job of LLDP? What's the purpose ...
The only router-only features we would really need are QoS, but really, we would only need to Classify, Mark, and Police traffic. I'm sure the switch offers these basic QoS functions, yes?Anyhow I appreciate the reassurance. I'm going to go the switc...
Thanks for the response.Allow me to clarify a bit,1. The Firewall (PFSense Firewall) connecting to the internet takes care of NAT and VPN and hands off to us using Ethernet.2. The T1 is handed off to us using Ethernet as well.So, I've got 2 Ethernet ...
Is this what you're referring to?http://www.cisco.com/en/US/prod/collateral/routers/ps221/prod_end-of-life_notice0900aecd802d3d0b_ps5854_Products_End-of-Life_Notice.html
