Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Does any one knows how to change the administrative distance of OSPF routing protocol in ACI for the particular route (Example: 0.0.0.0/0). There is a option available to change the AD value for the whole VRF but not sure how to change it for...
Hi, If the ACI fabric receives the same route (0.0.00.0) through two different border leafs using two different protocol eBGP and OSPF, how does the border leafs decide to take which path. Link to any documentation would be really helpful LEAF 107, 1...
Hi All, PFA the diagram. TWO SPINE SWITCHESLEAF 105 & 106 – BORDER LEAF SWITCHES ARE CONNECTED TO SPINELEGACY N7K CORE SWITCH1 IS CONNECTED TO LEAF 105LEGACY N7K CORE SWITCH2 IS CONNECTED TO LEAF 106L3 OUT CREATED BETWEEN N7K AND BORDER LEAF SWITCHES...
Hi All, I have two different internet links however have only one /24 public IP segment. How do we configure the BGP load-sharing. We want to make use of both the internet links. The ISP's wont allow the the prefix length less than /24 so i can't bre...
Hi,As per Cisco, Only one EIGRP L3 out per leaf switch - irrespective of number of L3 devices. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.htmlG...
Hi, ACI Fabric L3Outhttps://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/guide-c07-743150.html Limitations and guidelines● EIGRP (IPv4) has been supported since APIC Release 1.1(1).● EIGRP ...
Hi, Thanks for the reply Do you need the 0/0 prefix learned from the other DC (through OSPF)? YES ( As a backup route) It would be much easier to simply filter out (through import route control) or simply not advertise the default route through OSPF...
thanks for the reply. The VRF is configured as a enforced. Will it be a problem to leak a default route 0.0.0.0/0? PFB the Cisco's document. Transit Routing with a Single L3Out ProfileBefore APIC, release 2.3(1f), transit routing was not supported wi...