About jrstuart

jrstuart · 08-24-2004

HiI did some tests configs of TE MPLS Tunnels (Head-ends). I used mpls TE bandwidth well (I guess), but I understand that the "tunnel mpls traffic-eng bandwidth xx " command is only for signalling.Now, I wan to know how do you control the Real BW ...

jrstuart · 08-31-2004

Certainly, configs could be a problemIn my experience, the PCALC errors arise due to miss configs in interfacesIn MPLS TE path calculation with bandwidth signalling requirements PCALCs look for RSVP bandwidth avalaible for each interface over the T...

jrstuart · 08-25-2004

Right, but my interest is Traffic that cross the tunnel. Son , in the other input interfaces I need to specify some criteria to thattraffic and apply reate-limit. If I have 30 Interfaces or more, no way.So,I think the TE tunnel, only for signallin...

jrstuart · 08-25-2004

We are providing MPLS VPN services and we manage the CEs (CPEs). We define the Interface address in PRIVATE range, also Loopbacks. It must be different for each VPN and try to get summarize blocks per PE and per VPN.We do that for 2 reasons:(1) Mana...

jrstuart · 08-24-2004

You are rightBut, if I have many interfaces, policy for each one with destination through the Tunnelinterface (i.e. prefix ACL PBR), does not scale. Also , if I have labeled packets coming over input interfaces , how can I do ?I tested output rate-l...

jrstuart · 08-24-2004

Rate-limit at the ingress is not my option because I will drop traffic that consume BW before drop. It is a solution, I will test, but is not my option.I want to drop at the output Tunnel, before BW consumptionThanks

Member Since	‎10-28-2001 06:05 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	7

User Statistics

User Activity

HOW TO CONTROL REAL BW POLICY IN TE TUNNEL

Re: RSVP Tunnel Error

Re: HOW TO CONTROL REAL BW POLICY IN TE TUNNEL

Re: Type of IP addresses in the IP VPN

Re: HOW TO CONTROL REAL BW POLICY IN TE TUNNEL

Re: HOW TO CONTROL REAL BW POLICY IN TE TUNNEL