Having hard time connecting to vpn from windows 10 Gateway to gatway works OK but I need to allow few users to log in from laptops and nothing works. Tried win10 vpn setup as well as quickVPN and still no luck. Tried this but still no luck: https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb624... https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb452... my client to gateway setup on RV042G : TunnelGroup VPN Tunnel No. 1 Tunnel Name : testclient Interface : WAN1 Enable : yes Local Group Setup Local Security Gateway Type : IP only IP Address : (WAN IP address) Local Security Group Type : Subnet IP Address : 192.168.1.0 Subnet Mask : 255.255.255.0 Remote Client Setup Remote Security Gateway Type : IP only IP Address: 192.168.0.0 IPSec Setup Keying Mode : IKE with Preshared key Phase 1 DH Group : Group2-1024bit Phase 1 Encryption : DES Phase 1 Authentication : MD5 Phase 1 SA Life Time : 28800seconds Perfect Forward Secrecy : yes Phase 2 DH Group : Group1 - 768 Phase 2 Encryption : DES Phase 2 Authentication : md5 Phase 2 SA Life Time : 3600seconds Preshared Key : (This is Security key) Minimum Preshared Key Complexity : Enable Thanks in advance for any suggestions.
... View more