Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Due to some reason, my PRI router need to be configured multiple dialer profiles with multiple dialer pool-member #. The "isdn call interface" command does not succesfully carry out and failed when display by using the show isdn history command. This...
Just want to know any expert can give me some ideas if,The ISDN BRI at remote router dialing multiple site (main & secondary DC) but only the main site can get through. The secondary site at normal time is shutdown.Observation from my setup:The route...
I'm quoting my customer to use the Cat6009 as core switch and router. The switch performance can scale up to 30Mpps for fast switch but the process switch is it limited to 680,000pps which equivalent to 332Mbps for L3/L4 ??Any Cisco expert can helps ...
Anybodies know how much the ppp keepalives packets siize (overhead) ? I need this value to find tune the ISDN dial backup...My ISDN always takes more than 1 minutes to kick in the ISDN....when the remote LO is having line problem (Note: during the li...
I have a customer (inexperienced network administrator) has the following stations setup and problems:Host A = 10.1.1.10 /24Host B = 10.1.1.6 /16Host C = 10.1.2.8 /16All above stations are connected to a Cisco Catalyst 2950 switch.Host A can ping to ...
I'd tested and confirm that the dialer remote-name command only allowed to entered once per dialer profile.The statement as mentioned by the Getronics CCIE engineer is correct.
Just would like to know if configured multiple NTP server, will it send the NTP queries to all the configured NTP server address or just the prefer one ?? and how to tweak the NTP queries timers to be longer from routers (client) ?? seems to be no wa...
The following was the input from one of the previous case forum. Is that true as he mentioned the second dialer string has to be dial same site ? Please advise. ejgonzalesiii - ENGINEER, GETRONICS, CCIE Oct 10, 2001, 6:02am PSTYou can not use dialer...
Thanks for your info. I seldom use dialer string (usually use dialer-map) and just would like to check with you the following doubts;1) I'd includes the ISDN IP under EIGRP network, this is to ensure the interesting traffic will be from router instea...
Thanks for your info but if I'm not wrong, the keepalives are supposely default to 3 consecutive to be missed for IOS before 12.2(8)T [ed]. The retires 5 only available or default for 12.2(13)T onwards. By shorter the timeout or to faster the backup...
