I would recommend calling into the support center at 1-866-606-1866 and a support engineer can troubleshoot further with you.We will want to setup a port mirror to a pc so we can see the traffic as it hits the switchport from the FreeBox.Randy Manth...

Have you checked Storm control this is under Security tab.Randy MantheyCisco SBSC

Nikolai,How and where in your topology are you doing the pcaps?Are you setting up a port mirror, or capturing directly on a device?What ports on the switch that your are testing are connecting to what device and if you are doing a port mirror what p...

Leslie,Port forwarding will only work from the WAN1 IP address. If you setup a one-to-one nat for an internal IP lets say 10.0.0.4 it will bind that IP address to the outside IP address you assign in the one-to-one nat which will over-rid any port f...

Leslie,You will, the Router will use the one-to-one nat over the port forward.Do you have dual wan?If so have you looked into the SA500 platform? This device would allow for Port based one-to-one nat. So you could forward port 25 from .30 and port 4...