Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There is an autoconfiguration tool in CCO.I'd suggest using it.Mica modems are related to dial-in service,whereas for ISDN users (2B+D) you need to use channelized T1/PRI feaures of the box.Best,Plamen
The question is not very clear?1. If both sides have the same 3000, you can connect to the office, disconnect and connect to the client side. If you are trying to establish two connections symultaneously, most probably at least one of the concentrato...
PPPoE and NAT are compatible.I'm not sure what do you mean "two-way NAT"?If you mean PAT, it is one thing,if you mean two way dinamic NAT it is different.For practical purposes, consider the PPPoE only as a protocolfor obtaining the IP address. As so...
Try this...1.interface Dialer1 description MY 801 router's dialer ip unnumbered Loopback0 no ip directed-broadcast encapsulation ppp no ip route-cache no ip mroute-cache no keepalive dialer in-band dialer idle-timeout 600 dialer-group 8 peer default ...
