Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts, I was able to make EIGRP work via Flexconfig, further, can somebody help on how to do this: interface GigabitEthernet1/1ip authentication mode eigrp 10 md5ip authentication key-chain eigrp 10 keychain1key chain keychain1key 1key-string 09...
Hi! Can somebody tell me how to do any dynamic routing in an ASA with FDM. Here are my device details:Model: Cisco ASA5508-X Threat DefenseSoftware: 6.4.0.7-53VDB: 309.0Rule Update: 2018-10-10-001-vrtI successfully created some configuration related ...
Hi, Where can I change the "crypto ipsec security-association lifetime" in a Cisco ASA5508-X Threat Defense and/or Cisco ASA5516-X Threat Defense? If it is possible at all. Or at least please help me find out what is default for those models. Thank y...
What could cause these following errors? This what happens before I see this:I turn on my remote computer internetI connect to cisco anyconnectI start to ping subnets on the other side of an S2S vpnPings start to fail, I logged in to the ASDM(this AS...
Let me start with this statement I've red: “The main difference between identity NAT and NAT exemption is that with identity NAT, the traffic must be sourced from the address specified with the nat 0 statement, whereas with NAT exemption, traffic can...
You maybe right on this one but we can't be sure because this is what debug shows me:As you know we have hub (asdm) and spoke (3 spokes,ftd) topology. HUB(5545), SPK1(5516), SPK2(5516), SPK3(5508). Now here's the thing:HUB is set to:crypto ipsec secu...
Hi Mohammed, appreciate your reply. I am completely lost in this one, I have been troubleshooting it for weeks now and been posting in this community couple of times. The scenario is, if the clear crypto isakmp sa is issued the whole HUB and SPOKE vp...
