Hi,Recently I had to stop an RServer to allow for software upgrades. I entered a no inservice command in the rserver config and all the connections on the serverfarm disappeared. I thought the no inservice should allow existing connections to finish....

Hi,I need some assistance with an issue I am looking at. We have a pair of 6509 switches, each switch is connected together with a port channel. Attached to each switch via another port channel is a Nokia firewall. The 2 nokias are running VRRP. The ...

Hi,I have an ACE4710 with a 100Mbps compression license. I have configured compression which seems to be working, but I have noticed, using sh resource usage all, that we have a high number of denied http-comp rate denied. What I would like to know i...

Hi,I have a pair of FT ACE 4710 offloading https traffic to a couple of webservers. We are seeing very high network utilisation when I capture the client facing port of the active ACE. There appears to alot of duplicate ACKs and TCP out-of-order pack...

I have a ACE 4710 which I have enabled compression on the L7 policy map using compress default-method gzip. We have recently run a performance test and I have noticed many compression errors on the show service-policy detail output. However I cannot ...