Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have Cisco 3750X Switch, recently we try to advertise VLSM of 10.6.206.144\27 to the switch with OSPF Protocol.Ip Pool we get after vlsm : 10.6.206.144-10.6.206.175OSPF Advertisement are: Router ospf 10 Ne...
VA Team found VA - SSH Weak Key Exchange Algorithms Enabled on WS-C3750X-24 IOS 15.2(4)E10.VA Description: The remote SSH server is configured to allow key exchange algorithms which are considered weak. This is based on the IETF draft document Key Ex...
Hi,After two days work i finally understand the bugs in my VLSM. I found that my subnets are overlapping with each other(in simple terms). And Thanks all of you for the help.
Thanks for Answer. but i am still confused. I have pool of 10.6.206.0 and created 6 subnets: S1=32, S2=16, S3=16, S4=64, S5=16 and s6=32. and only facing issue in last subnet which pool size is 32 host. s5 end at 10.6.206.143 and s6 start with 10.6.2...
still this command exist, we found the VA.Should i place command in switch to mitigate the VA--> ssh -vvv -o "KexAlgorithms diffie-hellman-group1-sha1" user@device_ipany other alternate way to disable the diffie-hellman-group1-sha1 in switch ?
@Kasun Bandara : Thank you for kind response.I have implemented suggested solution and same things are mentioned in configuration but it is not solved.
