Hello Dears, I have the following situation on a router. I have a mail relay agent(10.0.0.5) and I have to translate port 25 of my global address x.x.x.x:25 to it. The mail relay agent sends the received mail to the mail server which has the add...
Hello Dears, I have recently installed a router with CME funcionality to be a gateway for a small network. The router has one public IP address for it outside interface witch handles the PAT for the internal hosts. There are 3 static nat translat...
That is a correct configuration but when you have an outbound connectionserver's address 10.0.0.6 will get translated with a random port, not port 25, since it is staticaly reserved from the statement ip nat inside source tcp 10.0.0.5 25 x.x.x.x...
Hi Federico, Thank you for the response but the problem is that it is not a ASA. It is a router. I can not figure out how to do the the NAT on a router.If somo1 can give a hint it'll be great.Thanks,Ivaylo
Problem has been solved by adding a secondary IP address on the outside interface. The address being the problematic NAT address.Sorry for the late reply. Thank you all.Best regards,Ivaylo
#sh interfaces gigabitEthernet 0/0GigabitEthernet0/0 is up, line protocol is up Hardware is MV96340 Ethernet, address is 6416.8dd6.27e0 (bia 6416.8dd6.27e0) Description: ### To ISP ### Internet address is 84.242.142.196/29 MTU 1500 bytes, BW 1000...
