About abdussamedpkpk

Bypass the IP NAT for VPN Users · 02-08-2010

Hi,I have configured ip nat on Cisco 6153 switch and it is working fine. But I need to bypass the ip nat configuration for VPN users.eg: 192.168.1.1 is NATed to a global IP address, the ip nat working fine but the same server I need to connect for th...

abdussamedpkpk · 11-02-2010

Hi, Ali AbduPlease try the command belowcrypto ipsec nat-transperancy udp-encaps under global mode. Then please let me knowAbdussamad

Re: Bypass the IP NAT for VPN Users · 03-03-2010

This is what I need to solve.The traffic is not blocking, because of the NATing I can not access this port for VPN.So that I need to bypass the NATing for the VPN users. Also I can reach the port if I am directly connecting any PC to the Switch direc...

Re: Bypass the IP NAT for VPN Users · 03-03-2010

I was trying to Telnet to the server port and it is possible if I remove the NAT. The filtered output of wireshark is like mentioned below.16 4.395941 10.1.1.82 10.10.10.10 tcp 56499 > 829 [syn] seq=0 Len0 MSS=1260 WS=819 7.403293 10.1.1.82 10.10.10....

Re: Bypass the IP NAT for VPN Users · 03-03-2010

Now the debug information is giving some positive result.Please see the attachment but still I can't reach the Server port.

Re: Bypass the IP NAT for VPN Users · 03-03-2010

Again the same resultMar 3 19:28:35.510 KSA: IP: s=10.10.10.10 (Vlan110), d=10.1.1.80, len 52, FIB policy rejected(no match) - normal forwardingMar 3 19:28:35.514 KSA: IP: s=10.10.10.10 (Vlan110), d=10.1.1.80 (Vlan100), len 52, policy rejected -- n...

Member Since	‎02-07-2010 11:11 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	23

User Statistics

User Activity

Bypass the IP NAT for VPN Users

Re: Server Connectitivity through VPN

Re: Bypass the IP NAT for VPN Users

Re: Bypass the IP NAT for VPN Users

Re: Bypass the IP NAT for VPN Users

Re: Bypass the IP NAT for VPN Users