Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I don't know how to make NAT for 192.168.0.0/24 network to replace the source address to the router address 172.23.120.5 for packets going to the network 10.10.21.100/32.I have working configuration in VyOS system, but how to make it in Cisco ...
Hello,I have a PBX Asterisk server, which is behind NAT, a Cisco 1921 router.I want to forward multiple ports to it but I found that it is not as easy as in linux using iptables.I thought this command would be appropriate:ip nat inside source static ...
Hello, I've got AIR-CAP3602I-E-K9 (Cisco Aironet 3600 Series) and I'm trying to set up DHCP server on this device without luck. Every wifi client connected to this device gets IP address from the router (access point acts as a relay). What should I d...
Thank you, it works, however I've noticed that I have a loop when I try to ping from any host behind GigabitEthernet0/1 to any host which is behind GigabitEthernet0/0ping 192.168.0.30
PING 192.168.0.30 (192.168.0.30) 56(84) bytes of data.
64 bytes fr...
