Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I try to authenticate Access Point using EAP-FAST. I did everything that is described here:https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-fixed/107946-LAP-802-1x.html
Although username and password are the same in Cisco...
Hi,
I have the IP Phone and Laptop connected to the same switch port. Although I use the authentication host-mode multi-domain command I have a security violation error:
%AUTHMGR-5-SECURITY_VIOLATION: Security violation on the interface Fa0/15, new...
Hi, I authenticate the user using the local database of ISE and I also want to authenticate my machine. But this machine is not joined to AD.How can I authenticate a nondomain machine? Machine username is host/example so I created the same username i...
Hi All,
There is a bug indicated in this link:https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvn18615
I upgraded my WLC and now I can authenticate APs using EAP-FAST.
This is my switch port configuration:
interface GigabitEthernet 1/0/1switchport access vlan 100switchport mode accessauthentication event server dead action authorize vlan 100authentication event server alive action reinitialize authentication host...
Cisco ISE 3.1 and patch 3 (the latest one)Cisco Virtual Wireless Controller Software Version 8.8.111.0APs are in flexconnect mode IOS version 8.8.111.0
Yes, the switch performs other EAP authentication successfully. I have that kind of issue only wit...
When I use EAP-FAST it says:22063 Wrong password
When I use PEAP it says:12851 Received unexpected EAP NAK message. Client rejected the conversation.
Recently I installed the latest patch but the problem still exists. Do you know any other resolu...
