Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have a VCS-E server, endpoints are registered directly to it. Some endpoints are registered with SIP, some with H.323 protocol.When endpoint registered with SIP dials to [email protected] then VCS-E initiates the call to sip:[email protected]. W...
Hello,We connected Y-cable to DVI-I input of SX20 that splits the DVI-I input to DVI and VGA ports.When we connect a laptop with VGA output to the SX20 TC6.3.0 through the Y-cable, we have two issues:1) The PC does not detect what "monitor" is connec...
I try to describe the situation more clearly.There are some external endpoints that can be connected by dialling h323:number@domain. For any case, I wouldn't publish real addresses, so let's say there are several endpoints, including h323:100@example...
Hello,The calling endpoints are registered to Expressway, there is no VCSC involved.H323 <-> SIP interworking mode is registered only.Just for case, I made another test. From the SIP endpoint I called to an IP number of endpoint that accepts only H.3...
I created search rules using regex to forward calls with destination .*@example.com to zone Example.The endpoint is registered to the VCS by SIP protocol.When I disable SIP in zone Example, the call is not set up.When I enable SIP in zone Example, th...
Hi Jonas,Yes, I understand that EDID signal does not go through split cable to both inputs.However, it does not make me any sense why SX20 is unable to receive 1920 x 1080 VGA signal in case EDID signal is missing?It happens also without Y-cable, ove...
