Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all,is there a way to configure the primary vsm on the secondary vsa node.i know i can do a system switchover on the vsm, but is there another way?thanks a lotronald
hi all,I currently got 2 nexus 5596 to do some testsFirst of all i wanted to create a management if without using mgmt0 (i use this if for vpc-peer)So what i did is:create a vlancreate a vrfenable feature interface-vlancreate a interface vlan within ...
hi,i am currently deploying a new asa-sm module (code 8.5.1) and i found a strange behaviour that i cannt explain.if i create a global access-list and bind it to the global access-group, i see this acl in the management access rules (via asdm)so it s...
Hi all,I am looking for a rtsp solution, and currently i cann't find an answer.The problem we got:We are using a ace to loadbalance streaming traffic, which uses rtsp/rtcp.rtsp is not a problem, simple vip on port 554 and forwarding to the servers.bu...
Hi all,We are running 4x n5k and started with the vPC feature.So my question is, if i can connect a vpc-pair to another vpc-pair?In the cisco docs i can find examples for connecting a vpc-pair to a single switch, or server (with and without fex)But t...
this thing is a bit strangewith enterprise without base lic:feature eigrpNo available license - LAN_BASE_SERVICES_PKG error Feature does not have an installed licensewith both lic installed i can enable eigrp:router eigrp 10 vrf poc_vpc address-f...
i just need the interfaces for managing the switch and do the tacacs auth over it .. and that seems to workbut it seems, the 5596 has some basic l3 functionality without the l3 daughter card
i installed the enterprise lic and the interface is up .. hsrp works, but i forgot to enable the featureBut hsrp seems to work without a license (tried it on the other switch where no base/enterprice lic is installed)
