Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone, I've been trying to track down a very stubborn problem that I've been having at 2sites now; the client computers show repeated syslog entries ofEvent 4201 - The system detected that the [XXX adapter name] was connected to the network,...
It's been some time but I thought I would update;Since my earlier posts I have captured 802.11 control packets and not found anything unusual. I have also purchased the support agreement from Cisco for access to IOS upgrades and updated both of the W...
Ok, I've had a chance to review your last post.1) Each site has an AIR-1242G on the plant floor and a WAP200 in the office area.At our Calgary plant, the WAP200 is within range of a couple of the plant floor clients. In Langley a site survey from eit...
Hey George, thank you for the to-do list. It will take me a little time to make the suggested changes as I have a few projects on the go at the moment. I will report back as soon as possible.
It never occurred to me to let the machines in range of the other AP roam as they have a solid signal from their intended AP, and the AP in the office is in my opinion a less reliable unit (Cisco SMB WAP200). Actually we originally used a WAP200 on ...
Hey George, yes sometimes more than a couple pings are lost. Also, there should be no roaming as the clients are only configured with access to one AP though a few of them are in range of another in the office. Now for the number of events in a 10 mi...
