Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good day,My company recently purchased a pair of ASA 5525s, and we're managing them with PRSM 9.3. Unfortunately, we lost our security administrator, and while we understand the basics of managing the system, we were never "cross-trained" on this de...
Hi All,We've got 400+ remote sites that connect to our central location (and a hot site) using Cisco routers with IPSec/GRE vpn tunnels. We use a basic template for creating the tunnels, so there is very little chance of a misconfiguration on either...
For the life of me, I can't come up with an answer to this... We have a working vpn tunnel using our old configuration between an 831 and a 2821. The 831 is running IOS v12.4(25d). However, when we try changing the remote configuration with a re...
Thanks to the consultant who installed our ASA/PRSM ststen have figured out where the problem was.The first problem seemed to be that the certificates just needed to be refreshed, though the problem only occurred a few times in over a month.The main ...
I just wanted to contact you to let you know that we, thanks to the consultant who installed our ASA/PRSM ststen have figured out where the problem was.The first problem seemed to be that the certificates just needed to be refreshed, though the probl...
Thank you so much! Your message pointed me in a different direction, and I found the problem I was having that I had shipped the remote location a replacement c831, which would build the VPN tunnel with the SECOND set of 2821s (the original c831 con...
Thank you very much for your reply. I had thought I had originally included this information, but it seems I didn't. At this moment, the remote Cisco 831 is down, as the location is currently using an alternate means to do business, so I can't get ...
I'm afraid that there doesn't seem to be a "correct answer" button that I can find, as described in the help...So if there's a moderator out there, can you please flag this thread as "answered?"Thanks!Mark
