Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI am trying to establish a IPSEC VPN between ASA 5510 and 3G Router. The ASA 5510 is ASA 7.0.8 and ASDM 5.2.I tried to configure using the VPN Wizard a site to site VPN but does not work. Can someone please explain the steps. RegardsPrashant
I have a ASA 5510 ASA version 7.0.8 and ASDM 5.2. I am not familiar with the CLI and am using the ASDM.I have connected the ASA 5510 as folllows:DSL Modem/Router(DHCP Server : 192.168.10.x)------->ASA 5510 Ethernet 0/0(DHCP configured, security level...
I have a ASA 5510 ASA version 7.0.8 and ASDM 5.2. I am not familiar with the CLI and am using the ASDM. I have connected the ASA 5510 as folllows: DSL Modem/Router(DHCP Server : 192.168.10.x)------->ASA 5510 Ethernet 0/0(DHCP configured, security lev...
Hello I am trying to get Internet access through the ASA. I have connected Ethernet 0/0 (Static IP 192.168.10.3, Security level 0, Subnet 255.255.255.0) to my DSL modem/router. Ethernet 0/1 (DHCP and Security level 100) but on running show interface...
I have Internet from a DSL connection from my ISP. Public IP from ISP is from a DHCP server after PPPOE dialing by the modem/router. I have connected the LAN from modem / router (DHCP = 192.168.15.0 - 192.168.15.254) --> Ethernet 0/0 on ASA 5510 (wit...
Hello AvinashThank you for your reply. I will go through the link you have give for the DDNS settings. In between I had used the dynamic IP in the peer IP address to test the connectivity. So I used dynamic public IP address at both sides ASA(3G SIM)...
HelloI was next trying to configure IPSEC VPN between ASA 5510 and a 3G router using the VPN wizard in ASDM. However, I am not able to configure it. 1. Is it possible to put a DDNS address in Peer IP address because the 3G router has dynamic IP. 2. P...
Hello NicolasThank you for your reply I have got this working now but am stuck with configuring a IPSEC VPN between ASA 5510 and a 3G router. I am not familiar with the CLI so I have used ASDM 5.2 on ASA 7.0.8 to configure a site to site VPN using VP...
