Hi,The AP has several vlans (employee, guest). There is a trunk up to the switch and all l3 vlan interfaces are created on the switch.I would like to add a clean access server. 1) Besides the configuration of the clean access server, do I just need t...

Hi,I have some questions regarding the ids module. A router is connected to the internet and is using the software firewall. There is also a NM-CIDS in the router.1) What is the sequence when a packet arrives from the internet?Is it internet -> firew...

Hi,We would like to move a tcp connection (not http) between host 1 and server 1 to host 1 and server 2 when server 1 has to be go under maintenance. A CSS would be used.If we put the server 1 in "out of service" mode, all new connections go to serve...

Hi,In the scenario where the CSM is in bridge mode,servers in group1 are in vlan 100servers in group2 are in vlan 100The client vlan is 200The requirement is that the servers in group1 have to be accessed from an external network and from group2 (sou...

Hi,I would like some clarifications on GSLB.If we have Data Center1 (DC1) and Data Center2 (DC2) and a back end connection exists between DC1 and DC2.GSLB allows a user to be connected to DC1 or DC2 based on the availability of the servers and load b...