About zawminoo2010

zawminoo2010 · 10-23-2011

We have 3 x WAP4410N at new office setup in Singapore.Customer asked us to setup those 3 AP to make client auth against an ACS 4.2 sitting in US office.All the user notebooks were joined to Windows domain in US office, before sent out to Singapore of...

zawminoo2010 · 10-31-2011

Thanks!I will try to call SBSC tomorrow.

zawminoo2010 · 10-31-2011

Hi Robert,Will you still be helping me here or I have only choice to call SBSC?I have never called SBSC before.All the way, I used to open TAC case for support but, this product is not listed in TAC supported product.So, I presume I can only go to SB...

zawminoo2010 · 10-29-2011

Just received reply from US office.Authentication type used on ACS is Radius (IETF).

zawminoo2010 · 10-29-2011

Thanks for response.I have asked US office for auth type in ACS. I will update to you, once I get it.We tested on domain joined NBs with "use windows login info" option and user auth was successful, according to ACS log.And we also tested with anothe...

zawminoo2010 · 10-29-2011

Hi Robert,Firmware version is 2.0.4.2.We have tested with WPA-personal, WPA2-personal and all worked.For enterprise, we have tested using WPA-ent, WPA2-ent, WPA2-ent-mixed and RADIUS.All did not work.Client keeps flapping between auth and validation....

Member Since	‎10-05-2010 09:03 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	8

User Statistics

User Activity

WAP4410N WPA2 Enterprise Mixed authentication problem against Cisco ACS 4.2

WAP4410N WPA2 Enterprise Mixed authentication problem against Ci

WAP4410N WPA2 Enterprise Mixed authentication problem against Ci

WAP4410N WPA2 Enterprise Mixed authentication problem against Ci

WAP4410N WPA2 Enterprise Mixed authentication problem against Ci

WAP4410N WPA2 Enterprise Mixed authentication problem against Ci