Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Does anyone know if client link and band select are supported when using wireless IP phones (cisco 7925).I haven't found any info which states not to use these features when wireless voice is used, however somehow i'm hesitating if these features ...
Hi,I'm looking for the 'Mean time between failure' values of the following products;AIR-LAP1522AG-E-K9AIR-LAP1142N-E-K9AIR-LAP1262N-E-K9AIR-CAP3502I-E-K9AIR-CAP3502E-E-K9AIR-CT5508-500-K9MSE Hardware SKUMSE Hardware SKU1000BASE-T SFPI have found some...
Hi,In config guide V6.0 WCS redundancy is described. Has anyone used this in real-life? http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/configuration/guide/6_0admin.html#wp1132580&http://www.cisco.com/en/US/partner/docs/wireless/wcs/6.0/conf...
We have two 4404's . Both using TPC and DCA. One of the WLC's does not respond to DCA updates at all.When looking at the DCA parameters (802.11a > RRM > Dynamic Channel Assignment (DCA)) the 'last channel auto assignment' is always displaying N.A. T...
The operating temperature for 2100 wireless lan controllers is up to a miximum of 40 degrees celsius according to the datasheet.We deployed some 2112 controllers all displaing a temperature above 50 degrees celsiun. This during normal operation and d...
Channel Utilization levels should be kept under 50%.What is CU : http://www.cisco.com/web/DK/assets/docs/presentations/partners/VoiceOverWireless_bestpractices.pdfRegardsGoen
'it was impossible to get the 1252 to even associate with the controller'maybe this can cause the issue ?http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte01087RLS 6.0.189.0 expected beginning of Marc...
Indeed Bugs. so fas it seems they are not 'bugging' us in real life .http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd17116 http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=f...
A good and easy way is to use Jperf (Iperf) an grapical tool wich provides you the actual througput of the network. Install this tool on a wired PC and a wireless client.http://code.google.com/p/xjperf/downloads/detail?name=jperf-2.0.2.zip&can=2&q=no...
