Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,We've a client/server application based on a Sybase database. It's parcel software of DHL called Easylog 6.1.The client app needs to connect to a DB server.When the client and server are on the same vlan, everything works fine. But i need...
Hi Guys,I'm trying for the last 3 days to get FTP work in my DMZ. In fact the FTPserver itself works, because i can FTP from the inside to the DMZ. But from the Outside to the DMZ i don't get it working.The situation:See the network diagram for detai...
Dear Cisco Users/experts,I'm not sure if posted in the right forum, but it's about ACLs and switching, so...Currently i'm configuring our new network:Core:2x 3750G (WS-C3750G-24-TS) in a stack, so it's one switch logically.Access:2x 2960G (WS-C2960G-...
Hi everyone,The problem is solved. While the originating application sends UDP broadcasts to find the server, you can also specify the host address in the ODBC connection.Open the corresponding ODBC DSNGo to the tab Network.enable checkbox TCP/IPfill...
At this stage i don't use dns. I connect to the public ip address of the ftp server.When everything works as it should, then i make two A-records on the DNS servers of the hosting company where our domains are hosted, each with one of the public IP a...
Hey,To make the FTP server accessible via the backup line, i've made the same settings i did with the primairy line. the only difference is that i applied the ACL to the backup interface, and the NAT rule i specified with another spare public IP, fro...
Hi everyone,Guess what, It works! i can reach the FTP server. All the ftp tests i did, i did them from the internal LAN. my thoughts were that when i ftp to the outside address, the packets also are delivered on the outside address. But it seems not ...
I've upgraded the ASA software and ASDM software. Everything went smooth.I'll come back tomorrow with capture results.As for now, the Access list doesn't show any hits... hmm. Are my interfaces wrong configured???
