Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am able to pass traffic with my ISP 1522 using a specially configured autonomous 1310 client radio. But I have tried several other 802.11b client radios which associate but will not pass traffic. Also 1522 will not pass traffic with Cisco 1242 or 1...
Thanks again Steve.So if I have the ISP set the WLC to a 104 bit WEP key on the 1522 will that be compatible with the 128 bit (has only 64 and 128) setting on the 1310 Client radio?
Hi Steve,Thanks for your reply. It appears that I can only set the 1310 client WEP to 64 or 128 bit. What if I try WPA-PSK TKIP? I have attached the config file of the 1310.
I converted a LAP1242ag back to autonomous using your method. I only had one problem, I had to use a more recent release v12.4 the 12.3 I had wouldn't work.Thanks for the tip.
I tried this method but get an I/O error like this:bridge: copy xmodem: flash:c1310-k9w7-tar.124-10b.JDA2.tarBegin the Xmodem or Xmodem-1K transfer now...CCCCCCCCCCBB0BB0xmodem:: I/O errorI have tried it many different ways, my baud rate is 9600, Any...
I have a lap-1242ag which I trying to convert. I followed the instructions and saw that the files got extracted. But the unit does the reboot (all lights green) but stops there, the status light never goes to flashing green.Can you help? I could post...
