Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Pix 501 configured for site to site access working correctly. However Cisco VPN clients stopped working when the Pix was setup for site to site. If the site to site configuration is removed the VPN client access is working.Attached is the PI...
I have 2 Pix 501s configured for site to site access (HomePIX, OfficePIX) . Site to site between the peers works correctly but Cisco client access does not work from any other site. When I reconfigure the office pix to exclude site to site Cisco clie...
When establishing a VPN connection behind a Pix 501 to a remote network with a PIX firewall, resources on the remote LAN are not available. This only happens when I am using a PIX firewall on the local side. I have no VPN issues when I use a Linksys ...
Thank you for your help.I resolved the issue by removing the lines:crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_mapandaccess-list 101 permit ip 10.0.0.0 255.255.255.0 10.2.0.0 255.255.255.0and adding:crypto map transam 65535 ipsec-is...
Arul,Thank you for your help.I resolved the issue by removing the lines:crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_mapandaccess-list 101 permit ip 10.0.0.0 255.255.255.0 10.2.0.0 255.255.255.0and adding:crypto map transam 65535 ips...
Arul,Fortunately I have already started drinking.I appreciate your time and I will implement the configuration changes this weekend. I will keep you informed.Thanks again.
