About andrea.cicchelli

andrea.cicchelli · 10-29-2010

Hi,I'm a newbie in networking.I have a asa 5505 and I need to make a connection to a lan 192.168.10.0 and another lan 192.4.0.0 in both directions.The two lan are on the same phisical network.Now from one i can see the other bat not in the inverse di...

andrea.cicchelli · 11-18-2010

Sorry for the delay ofthis response and thanks for your time.I tried your configuration but it doesn't work.This is the config!interface Vlan1 nameif inside security-level 100 ip address 192.4.0.26 255.255.255.0 ospf cost 10!interface Vlan2 nameif o...

andrea.cicchelli · 11-03-2010

I didn't solve it.Maybe it can be useful to help me. see my config.The two network, with this configuration, do not see each otherWhen I try to use "Packet Tracer" the packet is dropped by inplicit incoming rule (deny ip any to any on inside and on o...

andrea.cicchelli · 11-03-2010

I have license Base on 5505.But I have only two vlan, so this should not be a problem.Andrea.

andrea.cicchelli · 11-03-2010

So, I had put the two interfaces on the same security level (100),I had put also"same-security-traffic permit inter-inaterface" and"same-security-traffic permit intra-inaterface"I had put a flag on "enabled traffic through the firewall without addres...

andrea.cicchelli · 10-29-2010

This is a simple diagramI need to use from a lan the server of the other and viceversa. At this moment I can use from every pc in lan A the machines in lan B,even if, to do this, I need to use machine's ip address of lan B (this should be a dns probl...

Member Since	‎10-29-2010 10:36 AM
Date Last Visited	‎07-23-2018 09:57 AM
Posts	6

User Statistics

User Activity

lan to lan with asa5505 on the same phisical network

Re: lan to lan with asa5505 on the same phisical network

Re: lan to lan with asa5505 on the same phisical network

Re: lan to lan with asa5505 on the same phisical network

Re: lan to lan with asa5505 on the same phisical network

Re: lan to lan with asa5505 on the same phisical network