Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am not sure if this is possible, but here goes. I have a PIX 525 using 4 interfaces, inside, outside, eng, and dmz. I would like to allow systems on inside, eng, and dmz to be reachable by their internal addresses (no NAT), but have them all NAT go...
I have several win2K clients that are currently behind a PIX doing NAT, and they are accessing shared resources on NT servers that are on the outside. One thing we cannot get working properly is netlogon against a PDC/BDC that is outside the PIX. A u...
I am using Cisco Secure ACS 2.5 on NT to authenticate users connecting to a VPN 5001 concentrator (V5.2.19). ACS is configured to authenticate against an external DB (A windows NT Domain). Everything works fine until a user incorrectly enters their p...
Hi Benoit,First off thank you for your response,I have outlined in more detail below the configuration I am considering.I have a PIX 525 running 5.3 with the following interfaces setup.Security Interface IP Range--------------------------------------...
