About skywise_ca

skywise_ca · 01-02-2020

I'm trying to run ucscfg(v3.0(3)) on my video-less C220 M4 so I can try to get control of it through the CIMC.I'm getting...---./ucscfg show text /biosUCS Configuration Utility v3.0(3)(c) 2017 Copyright Cisco Systems Inc., All rights reserved.Error :...

skywise_ca · 12-23-2019

We have 3 C220 M4 units and I have a problem with one of them.Simply, it has no video out.The monitor stays off but will flicker to life each time the video changes mode. (several times during BIOS startup)Video works fine on the other 2 units, so ca...

skywise_ca · 01-07-2020

I know how frustrating it is to come across one of these posts and never see a conclusion, so here it is.  TLDR: I got access to the remote console via a BIOS update but this probably won't help anyone else. My first try at gaining access to the CI...

skywise_ca · 01-07-2020

@amarino2 wrote:There is no utility to configure the CIMC from an installed OS. You can try the serial console port on the rear of the server to try and get any output. Seems like buad 56700 should work: https://community.cisco.com/t5/ip-telephony-an...

skywise_ca · 01-02-2020

I installed centos 6 on another C220M4 in order to test V2 of the ucscfg config.---./ucscfg show text /biosUCS Configuration Utility v2.0(3a)(c) 2014 Copyright Cisco Systems Inc., All rights reserved.Error : Unsupported/Error in detecting hardware pl...

skywise_ca · 12-31-2019

No luck. I threw one of the other M4 units on it's network ports to see if it's DHCPing anything and it wasn't.Even used TCPDump to see if it had a dedicated IP it was trying to communicate on and still no luck, no packets at all. (except for a coup...

Member Since	‎12-23-2019 12:50 PM
Date Last Visited	‎01-09-2020 12:40 PM
Posts	6
Total Helpful Votes Received	1

User Statistics

User Activity

ucscfg unsupported hardware error.

How to communicate with a c220 M4 (with no video)

Re: How to communicate with a c220 M4 (with no video)

Re: How to communicate with a c220 M4 (with no video)

Re: ucscfg unsupported hardware error.

Re: How to communicate with a c220 M4 (with no video)