Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to debug IBNS 2.0 on one of my switchports when a non-responsive device is connected.I have the following debug logging enabled: testswitch#sho debug
General OS:
AAA Authentication debugging is on
AAA Authorization debugging is on
A...
I have a NAC CPL that works fine on my ip-base switch with 3.6.9 but has issues on my lanbase with 16.3.8on the 16.3.8 switch, the port fails auth, applies the guest network template and then immediately un-applies it and reattempts authentication re...
I'm working on configuring RADIUS authentication on our network and have run into an issue where, after successfully getting authorized on a port, the supplicant drops about 2 seconds worth of packets every 30 seconds or so. I have the following debu...
The problem went away by placing the authorize statement before the activate service-template statement. The access manager was immediately unauthorizing after authorizing with the authorize statement being last (for some reason)
... And removing the "ip device tracking probe auto-source fallback 0.0.0.1 255.255.255.0" command seems to have fixed this particular problem. The technical details of why this was causing the problem are beyond me, but it works. Of course, that m...
It looks like it may be related to IPDT... debugging IPDT, the following messages get logged every time connectivity is lost: Jan 1 20:52:39.494: sw_host_track-ev:ARP packet received from ARP snooper(Gi1/0/1 10.11.32.74 (1860.2484.8868) VLAN:32)
Jan...
