About EmmanuelNdoping23803

EmmanuelNdoping23803 · 01-12-2020

I am running image "AP3G1-K9W8-M".What is the CLI command reset configuration to default?

EmmanuelNdoping23803 · 01-09-2020

I have a standalone system running "AP3G1-K9W8-M" with with Laptop connected (wired).I configured a static IP on the same subnet as the Laptop. I keep getting the error as seen in the title and the IP resets DHCP. How do get around this problem. Is t...

EmmanuelNdoping23803 · 02-21-2020

I have the same issue as seen here.The first Error message "Timeout" is misleading. When I monitored the TFTP server logs I could see the AP actually reached the TFTP server. In fact, the server open the data transfer window ready with the packet tra...

EmmanuelNdoping23803 · 02-21-2020

I tried to use the command AP# "capwap ap autonomous" on the AP1262N and got the message "Command not supported on this platform".Is there another way of converting the AP1262N to autonomous mode?

EmmanuelNdoping23803 · 01-10-2020

ap: set IP_ADDR 192.168.100.100ap: set NETMASK 255.255.255.0ap: set DEFAULT_ROUTER 192.168.100.1ap: tftp_ ?? -- Present list of available commandsboot -- Load and boot an executable imagecat -- Concatenate (type) file(s)copy -- Copy a filedelete -- D...

EmmanuelNdoping23803 · 01-10-2020

Hello,I followed the instructions you provided, however the commands "tftp_init" and "ether_init".I did however entered the tar command and got "permission denied"

EmmanuelNdoping23803 · 01-10-2020

Hello,I am trying to upgrade to the full featured image. When it is switches to DHCP I communication to the TFTP server is lost resulting in timeout of the download process hence the upgrade.

Member Since	‎01-09-2020 02:11 PM
Date Last Visited	‎02-28-2020 11:55 AM
Posts	7

User Statistics

User Activity

What CLI commands will reset configuration to default on image "AP3G1-K9W8-M"

Could not discover WLC using static IP. Forcing AP to use DHCP....

Re: tftp Server Error

Re: I was able to resolve this

Re: Could not discover WLC using static IP. Forcing AP to use DHCP....

Re: Could not discover WLC using static IP. Forcing AP to use DHCP....

Re: Could not discover WLC using static IP. Forcing AP to use DHCP....