About kba-rechenzentrum

kba-rechenzentrum · 01-22-2020

Hi there!I wanted to upgrade memory in our UCS-B200-M4 Servers.Here are the Steps what I have done:1. shutdown server2. remove server from chassis3. install new memory4. put server into chassis (same slot) After these steps server rebooted automatica...

kba-rechenzentrum · 02-09-2020

Hi Akash, thanks for your reply, I will give him a try next time. regards, Christoph

kba-rechenzentrum · 01-22-2020

Hi Kirk,thanks for your feedback! No error is shown, SD-Card is ok, boot order is SD-Card only.Now I reinstalled the second server, tomorrow I will try the third.Maybe I have to do something between shutdown and remove the server from cassis? THXChri...

kba-rechenzentrum · 01-22-2020

THX for replay!The RAM is OK, I only added two new memory modules (2 x 64GB before and now 4 x 64GB).I tried to remove the new RAM but it was the same, after HW checks a message appears to insert boot device. Re installation of OS was no problem and ...

Member Since	‎01-22-2020 02:56 AM
Date Last Visited	‎02-16-2020 10:02 PM
Posts	4

User Statistics

User Activity

UCS B200-M4 will not boot

Re: UCS B200-M4 will not boot

Re: UCS B200-M4 will not boot

Re: UCS B200-M4 will not boot