Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
cisco MDS 9100 ("1/2 Gbps FC/Supervisor")System version: 3.3(4a)Please anyone tell me how to do a gracefull shutdown of a Cisco MDS SAN switch? . I have followed the manuals but they only talks about shutting down of a individual interfaces, but not...
RHEL 5.5 x64 and UCS C200 M2 server.Trying to do the BIOS update from the OS, and getting the bellow error.# ./iflash32 -ni -u ./C200-BIOS-1-2-1a-0.cap iFlash32 Ver 1.1 Build 3Copyright (C) 2009 Cisco Systems Inc.*ERROR* Unable to find necessary BIOS...
I have one Cisco UCS C200 M2 rack mount server with Qlogic CNA installed. I have removed Qlogic CNA and inserted Emulex LPe11002 HBA, connected the HBA to the fabric, and assigned one LUN with single-path to the UCS server. The installed OS is RHEL5....
There is only one slot in the server.Since the OS is seeing the LUN, and since i am able to format/read/write on the LUN, then no need to doubt the PCI slot.
