Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We are facing a situation on our inter-sites network. The concerned sites are represented in the visio file attached into this email.For a brief description of the inter-sites connections (please refer to the schema attached) : 3 sites are conc...
Hi,I'm trying to configure NTP with DNS resolution on my switchs ( ntp server dns-name ) but apparently the switch do the resolution and fix the IP adress on configuration. When i change the IP address of my ntp server, there's no more synchronizatio...
Hi,i've a stack of two 3750-G, we configured enable password to Console access, but when we connect to slave switch, we're not asked for an enable password, therefore when we connect to master switch, we need this password to access to privilege mode...
Hi,I have to configure a bfd session between my ASR and a Firewall, over a BGP session.but after configuration i ca't even see the configured session when doing a "show bfd session".by reading some cisco docs, i've seen that BFD can be configured onl...
Hi,i've some interrogation about system class on NEXUS 5000.A policy configured on an interface will be used if this interface is congestioned. So could some one help me to understand when the system class policy will be used, if it's not attached to...
Hi,Stangely, when i ping A-Core1 from B-Core1 with source 215.50.95.45 and it works.This topology is on production, so i can't do changes, i will try next week to put the reverse route.But sincerely, i want just to understand why we can't reach A-Cor...
Hi,first of all, thank you for your answers.But, even if it's asymetric routing, it should works fine because the subnet 215.50.95.44/30 is know as part of Site B by the operator.i'm trying to understand why this won't work.Any idea ? PS : i joined t...
this is a part of the configurationCRSF-VIRT-COEUR1(config)#ntp server ntpa1X.X.X. source vlan 90 prefer Translating "ntpa1X.X.X.X"...domain server (210.X.X.140) [OK]CRSF-VIRT-COEUR1(config)#CRSF-VIRT-COEUR1#sh run | i ntpntp clock-period 17179582nt...
Hi,According to http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCee92279connecting to the console port on any slave switch in a stack and have it appear as if he/she is talkingdirectly to the stack mas...
