2016-06-10 05:53 PM
Hello,
We bought new SG500 and want to migrate office network from Catalyst 3750G.
We use SFP modules in 3750 and I want to use the same SFP modules in SG500 too.
If I read the administrator guide, then any SFP module can works at 1Gbps.
For example, we have below SFP module in 3750G now.
NAME: "GigabitEthernet1/0/1", DESCR: "10/100/1000BaseTX SFP"
PID: GLC-T , VID: , SN: XXXXXXXXXXXXXXX
Can we use this SFP module in SG500 as network cable ?
We already have fibre cable under floor more than 30 meters and want to use this fibre cable for SG500 too.
Best Regards,
Miyoshi
2016-06-13 05:31 PM
Hello,
Thank you for visiting Cisco Support Community Japan.
We are sorry this community is intended to communicate in Japanese language. Support Community English should suit better for English speakers so that your question should have more chance to get resolved soon.
https://supportforums.cisco.com/
Thanks and Regards,
Cisco Support Community Japan
2016-06-13 11:24 PM
Ah OK, I'm native Japanese speaker :)
改めましてお世話になります。
お尋ねしたいことは簡単で、Catalyst 3750 で使用していた SFP + Fibre を SG500 の
25,26 番目の口に使用できるかどうかを確かめたかったのです。
マニュアルを読む限り 1G の速度であればどんな SFP でもつながると読めるのですが、
実際のところどうなのかと思いまして質問させていただきました。
海外の IT スタッフのいないオフィスで床下の配線をやり直すのは非常に骨が折れますので...
いかがでしょうか?
ご回答が得られない場合は英語サイトに移動したいと思います。
何卒よろしく願いいたします。
Miyoshi
2016-06-14 12:17 AM
正確な型番の記入を忘れていました。
SG500-28MPP 28-Port Gigabit PoE+ Stackable Managed Switch
のスタックを使用しております。
よろしくお願いいたします。
Miyoshi
エキスパートの回答、ステップバイステップガイド、最新のトピックなどお気に入りのアイデアを見つけたら、あとで参照できるように保存しましょう。
コミュニティは初めてですか?これらのヒントを活用してスタートしましょう。 コミュニティの活用方法 新メンバーガイド