キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 
cancel
1204
閲覧回数
0
いいね!
0
コメント
yukiyosh
Cisco Employee
Cisco Employee

 

 

はじめに

本ドキュメントは Catalyst 9400 で基本的な各種トラブルシューティングで はじめに確認するコマンド群を紹介します。

 

トラブルシューティングは事象に対して一回のコマンド群の採取で、全てを網羅することは不可能であり、Step by Step で事象の詳細化、絞り込み化が重要です。

一回のコマンド採取のみしか許可されないというユーザ様は、本番環境とは別環境で再現性の確立の上、コマンド採取頂くことが有効です。

 

  

ASIC Exceptions

Example:

Cat9400#show platform hardware fed active fwd-asic drops exceptions

****EXCEPTION STATS ASIC INSTANCE 0 (asic/core 0/0)****
=================================================================================
 Asic/core |                NAME                  |   prev   |  current  |  delta
=================================================================================
0  0  NO_EXCEPTION                                   0          0           0
0  0  IPV4_CHECKSUM_ERROR                            0          0           0

 

  

  

CoPP Drops

例:

Cat9400#show plat hard fed active qos queue stats internal cpu policer

                         CPU Queue Statistics                  
================================================================================================
                                              (default)  (set)     Queue        Queue
QId PlcIdx  Queue Name                Enabled   Rate     Rate      Drop(Bytes)  Drop(Frames)
--------------------------------------------------------------------------------------------
0    11     DOT1X Auth                  No      1000      1000     0            0          
1    1      L2 Control                  No      500       600      0            0          
2    14     Forus traffic               No      1000      1000     0            0          
3    0      ICMP GEN                    Yes     600       600      0            0          
4    2      Routing Control             Yes     1800      1800     0            0          
5    14     Forus Address resolution    No      1000      1000     0            0          
6    3      ICMP Redirect               Yes     600       200      0            0          
7    16     Unused                      No      1000      1000     0            0          
8    4      L2 LVX Cont Pack            Yes     1000      1000     0            0          
9    16     Unused                      No      1000      1000     0            0          

  

  

CPU Inteface

例:

Cat9400#show platform software fed active cpu-interface 
queue                      retrieved   dropped     invalid     hol-block   
-------------------------------------------------------------------------
Routing Protocol           0           0           0           0           
L2 Protocol                0           0           0           0           
sw forwarding              0           0           0           0           
broadcast                  0           0           0           0           
icmp                       0           0           0           0           
icmp redirect              0           0           0           0           
logging                    0           0           0           0           
rpf-fail                   0           0           0           0           
DOT1X authentication       0           0           0           0           
Forus Traffic              0           0           0           0           
Forus Resolution           0           0           0           0           
Wireless q5                0           0           0           0           
Wireless q1                0           0           0           0           
Wireless q2                0           0           0           0           
Wireless q3                0           0           0           0           
Wireless q4                0           0           0           0           
Learning cache             0           0           0           0           
Topology control           0           0           0           0           
Proto snooping             0           0           0           0           
BFD Low latency            0           0           0           0           
Transit Traffic            0           0           0           0           
Multi End station          0           0           0           0           
Health Check               0           0           0           0           
Health Check               0           0           0           0           
Crypto control             0           0           0           0           
Exception                  0           0           0           0           
General Punt               0           0           0           0           
NFL sampled data           0           0           0           0           
STG cache                  0           0           0           0           
EGR exception              0           0           0           0           
FSS                        0           0           0           0           
Multicast data             0           0           0           0       

  

  

CPU Inject Queues

Inject: CP generated protocol packet sent to DP to egress out on IO interface(s).

例:

Cat9400#show platform software fed active inject cpuq all
Inject CPU Q Statistics
===========================================

CPU Q Id                         : 0
CPU Q Name                       : TX_CPUQ_PRIO_LOW
Packets received from IOSd       : 766
Enq to pkt driver total attempts : 0
Enq to pkt driver failed count   : 0
Count of TX CMPL received        : 0
TX suspend count                 : 0
TX unsuspend count               : 0

  

  

CPU Punt Queues

Punt: Ingress protocol control packet which intercepted by DP sent to the CP to process it.

Dumps all the packets sent to the different CPU queues and possible drops.

Example:

Cat9400#show platform software fed active punt cpuq all
Punt CPU Q Statistics
===========================================

CPU Q Id                       : 0
CPU Q Name                     : CPU_Q_DOT1X_AUTH
Packets received from ASIC     : 0
Send to IOSd total attempts    : 0
Send to IOSd failed count      : 0
RX suspend count               : 0

  

  

Module Diag History

例:

Cat9400#show logging onboard slot 3 message detail 
--------------------------------------------------------------------------------
ERROR MESSAGE SUMMARY INFORMATION
--------------------------------------------------------------------------------
MM/DD/YYYY HH:MM:SS Facility-Sev-Name | Count | Persistence Flag
--------------------------------------------------------------------------------
No historical data
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
ERROR MESSAGE CONTINUOUS INFORMATION
--------------------------------------------------------------------------------
MM/DD/YYYY HH:MM:SS Facility-Sev-Name
--------------------------------------------------------------------------------
08/31/2017 20:38:00 %IOSXE-2-DIAGNOSTICS_PASSED : Diagnostics Thermal passed
09/06/2017 08:53:43 %IOSXE-2-DIAGNOSTICS_PASSED : Diagnostics Thermal passed
09/06/2017 09:13:54 %IOSXE-2-DIAGNOSTICS_PASSED : Diagnostics Thermal passed
09/06/2017 09:37:54 %IOSXE-2-DIAGNOSTICS_PASSED : Diagnostics Thermal passed
09/06/2017 10:50:32 %IOSXE-2-DIAGNOSTICS_PASSED : Diagnostics Thermal passed

  

  

TCAM Utilizaion

例:

Cat9400#show platform hardware fed active fwd-asic resource tcam utilization 0 
CAM Utilization for ASIC Instance [0]
 Table                                              Max Values        Used Values
 --------------------------------------------------------------------------------
 Unicast MAC addresses                              65536/512          18/21  
 IGMP and Multicast groups                          16384/1024          0/0   
 L2 Multicast groups                                16384/1024          0/0   
 Directly or indirectly connected routes            49152/65536          8/16  
 NAT/PAT SA address and Port                           0                 0
 QoS Access Control Entries                         18432                 0

    

  

Uptime of Linecards

Cat9400# show platform 
Chassis type: C9410R              

Slot      Type                State                 Insert time (ago) 
--------- ------------------- --------------------- ----------------- 
2         C9400-LC-48T        ok                    1d02h         
 2/0      C9400-LC-48T        ok                    00:01:15      
3         C9400-LC-48U        ok                    1d02h         
 3/0      C9400-LC-48U        ok                    1d02h         
5         C9400-SUP-1         ok                    1d02h         
 5/0      C9400-SUP-1         ok                    1d02h         
R0        C9400-SUP-1         ok, active            1d02h         
P3        C9400-PWR-3200AC    ps, fail              1d02h         
P4        C9400-PWR-3200AC    ok                    1d02h         
P17       C9410-FAN           ok                    1d02h         

Slot      CPLD Version        Firmware Version                        
--------- ------------------- --------------------------------------- 
2         17072305            16.6.1r [FC2]                       
3         17072305            16.6.1r [FC2]                       
5         17072305            16.6.1r [FC2]                       

 

Getting Started

検索バーにキーワード、フレーズ、または質問を入力し、お探しのものを見つけましょう

シスコ コミュニティをいち早く使いこなしていただけるよう役立つリンクをまとめました。みなさんのジャーニーがより良いものとなるようお手伝いします