HI,
The Cisco Fast Ethernet HWICs are singlewide interface cards, available as a 1-port HWIC (HWIC-1FE) and as a 2-port HWIC (HWIC-2FE), that provide Cisco modular and integrated services routers with additional Layer 3 routed ports.
During normal installation, it should be directly configurable:
Example
interface FastEthernet0/0/1
description Connection To xxx
ip address 172.x.x.10 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip ospf authentication message-digest
ip ospf message-digest-key 1 md5 <removed>
ip ospf network point-to-point
ip ospf 1 area 0
duplex full
speed 100
no mop enabled
!
HWIC-2FE Specifications | |
Manufacturer | Cisco |
Part Number | HWIC-2FE |
Device Type | Expansion module |
Form factor | Plug-in module |
The Fast Ethernet routed ports on the HWICs have the same characteristics and features as the onboard LAN interfaces for the integrated-services-router platforms. Along with Layer 3 connectivity, such as per-port access control lists (ACLs), routing, and IP addressing, these HWICs provide functions equivalent to those of onboard Fast Ethernet routed ports. | |
Interfaces/Ports | 2 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/Auto MDI/MDI-X |
Data Transfer Rate | 10 Mbps Ethernet 100 Mbps Fast Ethernet |
Ethernet and VLAN | IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP) IEEE802.3 with IEEE802.2 and Subnetwork Access Protocol (SNAP) IEEE 802.1Q VLAN tagging Autosensing, autonegotiation, and automatic media-dependent interface crossover (Auto-MDIX) Unique MAC address (not shared with any other interface on the router), assigned MAC address to interface, and subinterfaces Network Management Features CiscoWorks Simple Network Management Protocol (SNMP) support Cisco NetFlow accounting |
Additional Features | IGMP, HSRP, GLBP, MPLS, GRE, IPv6, IPsec, L2TPv3, DHCP, NAT, GTS, MGCP, IBM, PPPoE, Bridging |
MIBs Supported | ENTITY-MIB, IF-MIB, OLD-CISCO-CHASSIS-MIB, RMON-MIB, ETHERLIKE-MIB, CISCO-ENT-ASSET-MIB, CISCO-ENTITY-FRU-CONTROL-MIB |
Agency Approvals | UL 1950, CSA-C22.2 #950, EN60950, TUV GS, IEC 950 |
Immunity | EN300386, EN55024 and CISPR24, EN50082-1 |
Emissions | FCC Part 15, Class A ICES-003, Class AEN55022, Class A CISPR22, Class AAS and NZS 3548, Class AVCCI, Class A EN 300386 EN61000-3-3 EN61000-3-2 |
Physical Specifications | |
Dimensions (W x D x H) | 3.08 x 4.74 x 0.76 in. |
Weight | 2-Port: 0.16 lbs or 2.56 oz. |
Environmental Specifications | Operating temperature: 32 to 104°F (0 to 40°C) Storage temperature: -4 to 149°F (-20 to 65°C) Relative humidity: 10 to 90%, noncondensing |