取消
显示结果 
搜索替代 
您的意思是: 
cancel
1202
查看次数
1
有帮助
6
回复

请教channel-group的配置

jialingwang4038
Spotlight
Spotlight

CISCO2811C/K9路由器添加了一块 HWIC-2FE板卡,2个外网口(interface FastEthernet0/0/0和interface FastEthernet0/0/1)链路已连通,请问新的板卡怎么配置controller E1 和channel-group

6 条回复6

M02@rt37
VIP
VIP

您好 @jialingwang4038 ,

请按照以下步骤操作。 C2811也有同样的情况。

https://www.cisco.com/c/dam/en/us/td/docs/routers/ncs4200/configuration/guide/tdm/tdm-cfg-t1-e1-ncs4200-book.html

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

请问HWIC-2FE板卡,即插即用的,不需要用于申明控制器类型,定义了这个接口吧?

card type e1 2 1 //用于申明控制器类型//数字2表示插槽号//最后的数字1表示模块号:注意不是端口号//

     controller E1 2/1/0  //用于生成接口//即是定义了这个接口

@jialingwang4038 ,

HWIC-2FE确实是2端口快速以太网接口卡,与E1或T1接口无关。

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

你好,Fast Ethernet HWICs和Multiflex Voice/WAN Interface Cards还是有区别的。

The Cisco Fast Ethernet HWICs are singlewide interface cards, available as a 1-port HWIC (HWIC-1FE) and as a 2-port HWIC (HWIC-2FE), that provide Cisco modular and integrated services routers with additional Layer 3 routed ports.

The T1/E1 Multiflex Voice/WAN Interface Cards are offered in single and dual port versions which can be used and then re-deployed as network requirements change, thereby addressing several applications

关于的支持,还是可以看看如下文档:

Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Card

1- and 2- Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers Data Sheet

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rps-Cheers | If it solves your problem, please mark as answer. Thanks !

jialingwang4038
Spotlight
Spotlight

感谢楼上几位大神的回复!

YilinChen
Spotlight
Spotlight

建议先明确要实现的原始需求是什么?对端是什么设备?通过E1线路是要跑成帧还是非成帧?具体配置反而并不是什么大问题,都能找到参考和范例

快捷链接