取消
显示结果 
搜索替代 
您的意思是: 
cancel
6316
查看次数
8
有帮助
6
回复

DDNS配置后无法远程访问

raoshine
Level 1
Level 1
本帖最后由 raoshine 于 2018-5-17 10:42 编辑
思科 RV130路由器,配置的PUBYUN的DDNS,路由器上显示测试成功,本地登陆域名,可以跳转到路由器WEB页面,但是外网就无法登陆,以前用的H3C的路由器设置DDNS可以在外网访问,是不是RV130还需要设置别的选项,大虾们帮忙看看
6 条回复6

bo chen
Spotlight
Spotlight
建议你去H3C的技术论坛提问。https://zhiliao.h3c.com/

Rockyw
Spotlight
Spotlight
楼主可以参考一下
Cisco RV130 Administration Manual: Configuring Dynamic Dns
https://www.manualslib.com/manual/835675/Cisco-Rv130.html?page=45
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
To use DDNS, you must set up an account with a DDNS provider such as DynDNS.com, TZO.com,
3322.org, or noip.com.
你用是什么DDNS服务提供商呀?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

Rockyw
Spotlight
Spotlight
这一篇也可以参考一下
Solved: Dynamic DNS in RV130
https://supportforums.cisco.com/t5/small-business-routers/dynamic-dns-in-rv130/td-p/2630189
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Rockyw | If it solves your problem, please mark as answer. Thanks !

raoshine
Level 1
Level 1
Rocky 发表于 2018-5-21 16:17
To use DDNS, you must set up an account with a DDNS provider such as DynDNS.com, TZO.com,
3322.org, ...

用的是3322的服务

raoshine
Level 1
Level 1
搞清楚了,是电信把默认的443端口封了,随便换了个端口就可以了
快捷链接