可以说一下具体的配置,需要做的内容是什么?如果只提供板卡型号和版本的话,基本上无法判断问题所在。
首先还是要确认配置是否正确,接下来配置的内容是否命中相关流量,如果有流量命中,再按照Policy来进行才是预期的行为。
BTW,关于这个问题,好在有一定的说明,7600安装SIP400可以参考下如下描述:
The Cisco 7600 SIP-400 does not support the following QoS classification features with AToM:
–Matching on data-link connection identifier (DLCI) is unsupported
–Matching on virtual LAN (VLAN) is unsupported
–Matching on class of service (CoS) is unsupported in Cisco IOS Release 12.2(18)SXE and Cisco IOS Release 12.2(18)SXE2 only. Beginning in Cisco IOS Release 12.2(18)SXF, it is supported with the 2-Port Gigabit Ethernet SPA.
–Matching on input interface is unsupported
–Matching on packet length is unsupported
–Matching on media access control (MAC) address is unsupported
–Matching on protocol type, including Border Gateway Protocol (BGP), is unsupported
The Cisco SPA-2X1GE-V2 Dual-Ports 100 MBPS Fast Ethernet Adapter is a network interface card (NIC) that provides two 100 Mbps fast Ethernet ports. It is designed to be used with Cisco's Service Provider Access (SPA) platform, which is a series of modular interface cards that can be used to upgrade or expand the capabilities of Cisco routers and switches.
The product is a compact, low-power device that can be used to connect two devices to a network at speeds of up to 100 Mbps. It supports full-duplex operation, which means that data can be transmitted and received simultaneously. The NIC also supports Quality of Service (QoS) features, which allow network administrators to prioritize traffic and ensure that critical applications receive the bandwidth they need.
The module is also compliant with IEEE 802.3u and IEEE 802.3z standards, which are the standards for fast Ethernet and Gigabit Ethernet, respectively. This means that the NIC is compatible with a wide range of network devices and protocols.
The Cisco SPA-2X1GE-V2 Dual-Ports 100 MBPS Fast Ethernet Adapter is a high-quality networking device that includes several key components that contribute to its performance and reliability. These components include:
目前没有看到关于SPA-2X1GE-V2不支持QoS的内容。另外一张SPA卡也是在同一设备上吗?
不知道是不是设备的资源不足了?现在设备配置的Feature多吗?如下命令可以尝试看看是否有用
show mls qos interface gx/x/x
show mls qos queuing interface
show mls qos
show mls qos aggregate-policer