ISE RADIUS dot1x authentication configure in EWC

[sjlee1]

Dear

I have question.

we need to configure ISE radius policy in EWC Controller AP for using users dot1x authentication.

Our AP information is like as below.

 * model: C9115AXI-R

 * OS : C9800-AP Software (C9800-AP-K9_IOSXE-UNIVERSALK9-M), Version 17.3.7

Is this version able to support dot1x authentication configuration function?

I tried to search but no any was confirmed correctly about this version.

If have information anything else, please share it.

Thank you,

Best Regards.

[Translator]

@Translator 

 예, 지원합니다.

dot1x를 사용하려면 WLC에 Radius 서버를 추가한 다음 WAP2 Enterprise 및 802.1x를 사용하여 SSID를 생성합니다

필요한 모든 정보는 다음 가이드에 나와 있습니다.

https://www.cisco.com/c/en/us/td/docs/wireless/controller/ewc/17-4/config-guide/ewc_cg_17_4/authentication_and_authorization_between_multiple_radius_servers.html