Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our FTD devices HA was failure. and after about an hour, It was re-connected automatically.when we checked failover history, It was confirmed like as below.It seems like was executed command "no failover" and was executed command "failover".So, after...
DearI have question.we need to configure ISE radius policy in EWC Controller AP for using users dot1x authentication.Our AP information is like as below. * model: C9115AXI-R * OS : C9800-AP Software (C9800-AP-K9_IOSXE-UNIVERSALK9-M), Version 17.3.7Is...
Dear ALLOur company provide install and use Cisco Secure Client version 5.1.6 to customer for authentication ISE dot1x to use local network.and also SSLVPN use authentication to ISE server.In case of Window 10 IoT OS, Is it possible to support Cisco...
DearI checked meraki MX OS release note and I saw this message in Known Issues.The Non-Meraki VPN service may fail to properly establish IKEv2 tunnels when the MX appliance is acting as the IKEv2 responder and many allowed subnets are configured.In a...
DearWe were experienced Non-Meraki VPN tunnel down between MX75 and 3rd-party(AWS) VPN device.But, we didn't able to check vpn tunnel status down except event message like as below.<< Event message >>Time(EDT) Security appliance Client Category Event...
Thank you for reply.Because I'm just wondering.. For example, IKE version is 1 and there are many subnets in Private subnets. Even in this case, can it be included in the above?
Thank you for reply. Yes, Right. MX75 is connected dual WAN links in Appliance. (Appliance - Spare)I understand that need to keeping only one AWS tunnel for keeping stable private connect with AWS.After I see your context, I recogize that need to kee...
Thank you for reply.In the past, I have configured AWS tunnel 2 EA. (Private subnets information was same both tunnel)and actually, It was issue due to 2 VPN tunnels was status up. So, I have changed to keeping 1 VPN tunnel through delete other one t...
