03-25-2022 10:30 AM
What is the best way to move a network from one organization to another? I know that licenses and devices can be easily moved, but is there a way to move a whole network?
I'm not even sure how I'd do it manually by re-creating the network in the destination organization. With a switch for example, I can't configure individual ports until the switch is present in the new network, but if I move it to the new network then I lose the ability to see what it's configuration was in the old network.
Do I have to manually document every single bit of device configuration on the existing network before I start moving devices? I'm thinking this would lead to a lot of downtime.
I may have to do this for several networks, hoping to find some way to automate or at least avoid the potential for human error.
03-25-2022 11:27 AM
HI,
It is not possible to do, but I think a good way should be to export the configurations using APIs and then import them. Take a look at this link https://github.com/meraki/automation-scripts
03-25-2022 11:48 AM
I'll have a look at this, thanks.
03-25-2022 11:41 AM
Get in touch with support, if I remember correctly, they can help out.
03-25-2022 11:49 AM
I thought this was the case as well, but the support engineer I spoke with said all they can do is help move devices/licenses, nothing regarding configuration.
03-25-2022 12:16 PM
Only possible if you move some networks at once to a new org https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Split_Overview_and_FAQ
07-28-2025 12:58 AM
You're absolutely right. What you can request from support is for the MX appliance to retain its configuration when moving to a different organization. While switches, APs, and other devices typically lose their settings when unclaimed, support has a method to preserve the configuration specifically for MX devices during the transition.
03-25-2022 07:22 PM
There doesn't appear to be a way to automate it as far as I know. You might want to look into creating a template for the new target network that would have your established config from your old one.
03-28-2022 05:44 AM
Interesting. In terms of minimizing downtime this seems like the best solution. Allows me to fully configure the destination network before having to move devices or licenses.
Any gotchas you can think of with this method?
03-28-2022 06:05 AM
No gotchas I can think of. But I'm going to assume you're prob moving an MX, I've used this doc before. Might want to take a look and read through it: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/MX_Templates_Best_Practices
There are other docs for different devices though so might want to take a look beforehand just in case.
Something I do just in practice is taking screenshots of the info I need and saving them with the device name/page so I can go back and do it. You made mention of ports and stuff. This doc is helpful to create a switch profile for ports: https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MS_Switching/Templates_for_Switching_Best_Practices#Creating_and_Using_Switch_Profiles
Looks like switch profiles are good for the same switches/same ports so might want to take that into consideration for deployment.
07-30-2025 04:58 AM
Whenever you create a new network without any devices in it you will get all the sections (MX, MR, MS, MT,...) So you can already configure firewall rules and SSID's before adding any device.
However you won't have any switchports and MX LAN ports to configure before you add the devices to it.
Once you have added all relevant devices, the other unused configuration sections will disappear.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide