10-24-2020 01:20 PM
I am labbing a DMVPN setup using MG21 has my ISP.
However it is giving me a private dhcp ip address. Anyway to change this to get the public ip address instead?
Solved! Go to Solution.
10-24-2020 02:22 PM
No... This is from the MG21 Dashboard settings documentation: "The MG is only supported in routed mode. It acts as a layer 3 gateway between the subnets configured below. Client traffic to the Internet is translated (NATed) so that its source IP becomes the uplink of the cellular gateway."
https://documentation.meraki.com/MG/MG_Wireless_WAN_Dashboard_Settings
10-24-2020 02:22 PM
No... This is from the MG21 Dashboard settings documentation: "The MG is only supported in routed mode. It acts as a layer 3 gateway between the subnets configured below. Client traffic to the Internet is translated (NATed) so that its source IP becomes the uplink of the cellular gateway."
https://documentation.meraki.com/MG/MG_Wireless_WAN_Dashboard_Settings
10-25-2020 07:00 AM
or quick response.Thanks
10-25-2020 07:07 AM
The configuration shows a couple ip addresses.
What is difference between Public and Cellular?
10-26-2020 03:06 AM
I'm not 100% certain, but I think it likely that the cellular IP is a dynamic IP (probably an RFC1918 one) allocated by the mobile carrier to the mobile data link itself, which will then be (Carrier Grade) NATed to a general public IP, unless you order an appropriate data plan for your SIM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide