03-16-2015 06:44 AM - edited 03-01-2019 04:48 AM
Hi Experts
Where can i find the ROOT password when i need to access some Logs regadring syslog setup
/Ola
★ CLI Commands ➡ cat /etc/syslog-startup.conf ➡ cat /etc/syslog-startup.conf.busybox ➡ cat /etc/syslog.conf ➡ cat /var/log/external/message ➡ (root) netstat -p | grep syslog ➡ (root) tcpdump -i eth0 -f port 514 ➡ (root) tcpdump -nnvvXS dst 10.122.254.77
/Ola
03-16-2015 08:32 AM
Ola,
The root password is only available to TAC. It requires a challenge/response key. If you can provide any additional commands you don't have access to run as Admin (in addition to those listed above) we can see if we can get them added.
Robert
03-17-2015 12:23 AM
Hi Robert
Great info from T regarding Syslog , but we are still working on the OOB MGM to get the syslog wworking and whith this ccommands we can se if the Leaf is sending traffic to the Syslogserver to find if we have configured something wrong or the syslog server won´t listen.
or can I see what the leaf is sending on the interface regarding syslog in some other way
/Ola
03-17-2015 09:26 AM
Ola,
* Simply disable and active\UP port on the Leaf that you are testing.
On the Leaf, perform "tail -f /var/log/external/messages"
On the Syslog Server,
Let us know what you see...
attached is an example of a working scenario.
03-16-2015 08:46 AM
Ola,
As Robert mentioned ROOT access at this time is for the Cisco Technical Support. The listed "cat commands" can be accessed by the 'admin' user. The "cat /var/log/external/messages" will help you determine if your setup is working.
If you are having a specific issue, please let us know what you are experiencing.
Thank you for using the ACI Support Community!
T.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide