04-10-2018 08:24 AM - edited 03-01-2019 05:31 AM
Hi all,
I can't ping and access via ssh two of my leafs.
I see them operationnals in ACI.
Thanks in advance for your help.
Solved! Go to Solution.
04-12-2018 04:01 AM
Hi Anthony,
Please specify if you are using inband or ooband to manage the ACI Fabric, verify in the portal under System>System Settings> APIC Connectivity preferences .
Verify if your leafs are configured correctly, under Tenants> mgmt > Tenant mgmt> Static Node Management Addresses .
Verify if the external switch ports where the leafs connect to (mgmt interfaces) have the correct vlan configured and verify on the leafs if the mgmt interface is up (Fabric> Inventory> Pod X> leaf X> Interfaces> mgmt interface> mgmt0)
cheers
Alexander
04-10-2018 09:44 AM
I think you're going to want to post more detail, are you using in band or out of band management, are they configured in the management tenant? Where are you originating the ping/ssh? From your desktop, or from the apic?
04-10-2018 10:17 AM
04-12-2018 04:01 AM
Hi Anthony,
Please specify if you are using inband or ooband to manage the ACI Fabric, verify in the portal under System>System Settings> APIC Connectivity preferences .
Verify if your leafs are configured correctly, under Tenants> mgmt > Tenant mgmt> Static Node Management Addresses .
Verify if the external switch ports where the leafs connect to (mgmt interfaces) have the correct vlan configured and verify on the leafs if the mgmt interface is up (Fabric> Inventory> Pod X> leaf X> Interfaces> mgmt interface> mgmt0)
cheers
Alexander
04-13-2018 03:33 AM
I found a solution to my problem (even if I actually have one bigger).
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide