Cisco ACI - QoS EPG

[Maurlai]

Hi Guys,

   I have a MultiPod (with IPN connection) configuration version 4.1 and I wuold like to configure QoS (or something else) in this way:

Scenario is 1 server in Pod1 and another 1 server in Pod2.

Both server are in the same EPG.

Servers interfaces between 2 Pods send replica traffic and they could send a lot of traffic.

I would like to configure traffic limitation in terms of BW. Or cap traffic to a 20% for example.

Can I configure QoS in the EPG? Which class can I set?

Have I to create a Custom QoS? 

Can I have an example of Custom QoS Class?

Thanksss

[Robert Burns]

Here's a few resources available that cover this:

https://unofficialaciguide.com/2018/07/25/aci-multi-pod-qos/

https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-737909.html#_Toc6452890

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/Cisco-APIC-and-QoS.html

https://www.ciscolive.com/global/on-demand-library.html?search=ACI%20quality%20of%20service#/session/1573153536777001JSmV

Robert