Configuration failed due to invalid-port

[thirodmorais]

The ACI has been raised a warning message in the APIC related to a configuration failed due to invalid-port for some node. As you can see below a sample of the message. 

F0849
minor
2021-04-08T11:02:56.385-03:00
Raised
topology/pod-1/node-109/local/svc-policyelem-id-0/uni/infra/hpaths-109_eth101_1_1/selectorissues
Fault delegate: Configuration failed due to invalid-port for node LEAF-109
Config
configuration-failed
configQual:invalid-port, configSt:failed-to-apply
2021-04-08T11:00:36.315-03:00
F0849
1
minor
minor
minor

Anyone here has an idea how to solve this warning?

Best regards,

Morais

[Sergiu.Daniluk]

Hi @thirodmorais 

You have a config issue:

https://pubhub.devnetcloud.com/media/apic-mim-ref-231/docs/FAULT-F0849.html

• For invalid-port, check the infra port selector, it should have only leaf host ports or fex host ports. Fabric ports are not allowed to be configured using infra port selector.

Stay safe,

Sergiu

[thirodmorais]

Please, how I can check what are the infra ports using the APIC GUI? I am getting these warning messages in some leaf nodes, in each leaf node the ports 1/1 and 1/2 are being used to connect to the FEX.

On the FEX, I don't know what are the ports that are being used to interconnect to LEAF switches. There is a way to check the ports on the FEX side?

The infra ports are dedicated ports in the switch?

Regards,

Morais

[Amine.Mkacher@]

Hi,

Did you find a solution for this problem ?

Regards,